Siffofin
1. 360 ° juyawa matsa kai, wanda ya dace da ayyuka daban-daban
2. OLED ainihin-lokaci nuni na daban-daban bayanai
3. Daya key iko, da aiki ne mai sauki da kuma dace, daya kammala aiki
4. Sake saitin maɓalli ɗaya, lokacin da aka sami kuskure a cikin tsarin crimping, zaka iya sake saitawa cikin sauƙi ta danna maɓallin
5. Haɓaka baturi zuwa 4.0AH.Batura biyu na iya aiki bi da bi
Ƙayyadaddun bayanai
| Max.karfi: | 120KN |
| Kewayon crimping: | 10-300 mm2 |
| bugun jini: | 17mm ku |
| Mai Ruwa: | Shell Tellus T15# |
| Yanayin yanayi: | -10-40 ℃ |
| Baturi: | 18v 4.0 Ah Li-Ion |
| Zagayowar zage-zage: | 42mm (dangane da girman) |
| Crimp/caja: | Kimanin260 crimps (Cu150 mm2) |
| Wutar lantarki: | AC 100V〜240V;50 ~ 60 Hz |
| Lokacin caji: | Kimanin1.5 hours |
| OLED nuni: | nuni irin ƙarfin lantarki, zafin jiki, crimping times, kurakurai bayanai |
| Na'urorin haɗi: | |
| Ƙarfafawa (mm2): | 10.16.25.35.50.70.95.120.150.185.240.300 |
| Nauyi (ciki har da baturi): | Kimanin6.86kg |
| Cikakken nauyi: | Kimanin.16kg |
| Girman katon: | 540x430x170mm |
| Kunshin: | Ɗayan pc/Aluminum alloy case/akwatin kwali |
| Baturi: | 2 guda |
| Caja: | 1 inji mai kwakwalwa |
| Rufe zoben Silinda: | 1 saiti |
| Zoben hatimi na bawul ɗin aminci: | 1 saiti |
Bayanin abubuwan da aka haɗa
| Sassan No. | Bayani | Aiki |
| 1 | Pin | Don kulle/buɗe babban mutu |
| 2 | Mutu | Don crimping, mutuƙar canzawa |
| 3 | Riƙe shirye-shiryen bidiyo | Don kulle/buɗe ƙasa mutu |
| 4 | Limited dunƙule | Don hana kai faduwa ko faduwa |
| 5 | LED nuna alama | Don nuna yanayin aiki da yanayin cajin baturi |
| 6 | Farin Led haske | Don haskaka wurin aiki |
| 7 | Tasiri | Domin farawa aiki |
| 8 | Maɓallin janyewa | Don ja da fistan da hannu idan an yi aiki da ba daidai ba |
| 8 | Tasiri | Domin farawa aiki |
| 9 | Kulle baturi | Don kulle/buɗe baturin |
| 10 | Baturi | Don samar da wuta, Li-ion mai caji (18V) |
Bayanin Aiki
1. 
MCU - gano matsa lamba ta atomatik yayin aiki kuma samar da kariya ta tsaro, kashe motar da sake saitawa ta atomatik bayan aiki.
2. 
Sake saitin atomatik - saki matsa lamba ta atomatik, ja da fistan zuwa wurin farawa lokacin da aka kai ga max fitarwa.
3. 
Sake saitin da hannu - zai iya ja da baya matsayi zuwa wurin farawa idan ya kasance mara kyau
4. 
Naúrar tana sanye da famfon piston guda biyu wanda ke da saurin kusancin mutun yana tura mai haɗawa da jinkirin crimping motsi.
5. 
Za'a iya juyar da kai mai kaifi da kyau ta hanyar 360 ° a kusa da axis na tsaye don samun mafi kyawun damar zuwa sasanninta da sauran wuraren aiki masu wahala.
6. 
Za a ji sauti ɗaya mai mahimmanci kuma jajayen nuni yana walƙiya idan wani kuskure ya faru.
Farin LED mai haske yana haskaka wurin aiki bayan kunna fararwa.Yana kashe ta atomatik 10 seconds.bayan ya saki tsokanar.
7. 
Ana sarrafa duk kayan aikin ta hanyar faɗaɗa ɗaya.Wannan yana haifar da kowane sauƙi mai sauƙi da mafi kyawun riko idan aka kwatanta da aikin maɓalli biyu.
8. 
Batura Li-ion ba su da tasirin ƙwaƙwalwar ajiya ko fitarwa da kai.Ko da bayan dogon lokaci na rashin aiki, kayan aiki koyaushe yana shirye don aiki.Bugu da ƙari muna ganin ƙarancin ƙarfin ƙarfin wuta tare da ƙarin ƙarfin 50% da guntu na caji idan aka kwatanta da batir Ni-MH.
9. 
Na'urar firikwensin zafin jiki yana sa kayan aiki ya daina aiki ta atomatik lokacin da zafin jiki sama da 60 ° C ƙarƙashin dogon lokaci yana aiki, siginar kuskure yana sauti, yana nufin kayan aiki ba zai iya ci gaba da aiki ba har sai zafin jiki ya ragu zuwa al'ada.
